urban tap water sludge dewatering filter press
|Terms of Trade:||CPT|
|Delivery Time:||30 Days|
|Packaging:||laden in bulk|
|Place of Origin:||Botou city, hebei province, China|
Model No.: BOOD-367
The structure of the filter press consists of three parts:
The frame is the basic component of the filter press. The two ends are the thrust plate and the press head. The beams on both sides are attached to the two. The beam is used to support the filter plate, the filter frame and the press plate.
1, thrust board: it is connected with the support seat on the foundation of the filter press, in the middle of the thrust plate of the filter press is the feed hole, the four corners have four holes, the upper two corners are the inlet of the washing liquid or the squeezed gas, and the lower two corners are exported (the dark current structure or filter outlet).
2, pressing plate: to compress filter plate filter frame, roller on both sides is used to support the pressing plate rolling on the track of the girder.
3, beam: is a load-bearing component, according to the requirements of the use of environmental protection, the choice of hard polyvinyl chloride, polypropylene, stainless steel coating or new anticorrosive paint coating.
Manual compression, mechanical pressure, hydraulic pressure.
1, manual compression: screw the mechanical jack to push the pressure plate to compress the filter plate.
2, mechanical compaction: compression mechanism consists of motor (equipped with advanced overload protector) reducer, gear, screw and fixed nut. When pressed, the motor is rotating, driving the reducer and the gear to make the screw rod rotate in the fixed wire mother, pushing the pressing plate to compress the filter plate and the filter frame. When the pressure is increasing, the load current of the motor increases. When the current value is set to the protector, the maximum pressure is reached. The motor cuts off the power and stops turning. As the wire rod and the fixed wire mother have reliable self locking helix angle, the motor can reliably guarantee the pressing state in the working process, when the motor is back, the motor reverses when the motor is returned. The pressing block on the pressing plate is pressed back to stop when the stroke switch is pressed.
3, hydraulic pressure: the structure of hydraulic pressure station consists of hydraulic station, oil cylinder, piston, piston rod, piston rod and pressure plate. The structure of the hydraulic station is: motor, oil pump, overflow valve (regulating pressure) reversing valve, pressure gauge, oil way, oil tank. When the hydraulic pressure is pressed tight, the hydraulic station is supplied with high pressure oil, the chamber of the oil cylinder and the piston is filled with oil. When the pressure is greater than the friction resistance of the pressed plate, the pressure plate is slowly pressed to tighten the filter plate. When the pressure is reached to the pressure value set by the overflow valve (displayed by the pressure gauge pointer), the filter plate, the filter frame (plate frame type) ) or the filter plate (wing type) is pressed, the overflow valve begins to unload. At this time, the motor power is cut off, the pressing action is completed, the reversing valve is returned, the pressure oil enters the rod cavity of the cylinder, and when the oil pressure can overcome the friction resistance of the pressed plate, the press plate begins to return. When the hydraulic pressure is automatically pressed, the pressure is controlled by the electric contact pressure gauge. The upper limit pointer and the lower limit pointer of the pressure gauge are set in the numerical value of the process requirements. When the pressure reaches the upper limit of the pressure gauge, the power supply is cut off, the oil pump stops power supply, and the pressure is caused by the leakage and leakage caused by the oil system. When falling to the lower limit of the pressure gauge, the power supply is connected and the oil pump begins to supply oil. When the pressure reaches the upper limit, the power supply is cut off and the oil pump stops supplying oil so that the pressure can be guaranteed in the process of filtering material.
Botou Youjian Environmental Protection Equipment Co. LTD.
Botou youjian environmental protection equipment co., LTD. is a professional company with the development, design, production, installation and service of environmental engineering and environmental protection equipment. Company is located in the coronal has the reputation of "hometown of pears" botou city, hebei province, the company in the east near the beijing-shanghai railway, beijing-shanghai high-speed and 104 national highway, 106 state road and west stone yellow high-speed, the geographical position is superior, the transportation is very convenient. Our company adheres to the tenet of quality first, users first, now reside in the domestic high grade, high quality, high performance, environmental protection equipment technology development and production base, production volume in the national top Xu in the industry. Main technical products are: cloth bag dust collector, single filter, cyclone, and electrostatic precipitator and wet dust collector, dust remover, the filter cartridge dust collector, injection machine and other kinds of environmental pollution control technology and equipment, dust bag, dust skeleton, electromagnetic pulse valve, discharge feeder and other accessories, products are widely used in metallurgy, electric power, building materials, chemical industry, etc. Company always adheres to the philosophy of science and technology innovation, work closely with scientific research units and the major design institute, has developed 30 many kinds of environmental protection technology and products, more than 20 projects to undertake all kinds of large-scale environmental engineering, the products sell well in more than 30 provinces and cities and exported to the United States, India, Vietnam and other countries and regions, has won the broad masses of users and design units. Among them, "pulse bag filter" and "high voltage electrostatic precipitator" were first approved by the provincial and national environmental protection bureau, and won the provincial and advanced environmental science and technology awards. We will take this as a new starting point and continue to work on the development and development of environmental engineering and environmental protection products. We will continue to maintain the advantages of high technology level, high quality of products and good reputation of enterprises. Establish the correct scientific outlook on development, constantly improve the overall quality of the company, enhance the market competitiveness, and push the company to a new level. In the development process, the company adheres to the combination of scientific research, design and production services, and takes the market with new mechanism, new thinking and new technology, and has achieved remarkable results. Company will continue to cooperate with the social from all walks of life ability, and sincerely hope friends from all walks of life will, as always support and concern the development of our company, for the development of the construction of a harmonious society, for the environmental protection enterprise strive brilliant tomorrow! Enterprise tenet: the lowest price but the best quality!
- Company Name: Botou Youjian Environmental Protection Equipment Co. LTD.
- Representative: douliangliang
- Product/Service: Dust Collecter , Industrial Dust Collector , Dust Collector Fittings , Cyclone Dust Collector , Desulfurization Collector , Filter Press
- Capital (Million US $): 1000000RMB
- Year Established: 2014
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 11% - 20%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Shiying industrial zone, botou city, hebei province, China
- Contact Person: Mr. Dou Liangliang
- Tel: 86-0317-5660622
Premium Related Products